TubeNet Logo

THE SITE FOR TUBE AND PIPE INDUSTRIES
http://www.tubenet.org

Quality Control, measuring, inspection and NDT equpment

Graebener Group Technologies OH United States
- Mill grade NDT Test stands with integrating brushing
- Tel: 419-591-7033
- Email:Click here
- Contact: Rich Marando

Accurex Measurement NJ United States
- Completely automatic measurement of bent tubes within seconds. TubeInspect will connect directly to benders for bend correction.
- Tel: 800-535-5798
- Email:Click here
- Contact: Bill Mongon

SIKORA International Corp. GA United States
- X-ray based measuring system of a new generation for use on tube and hose extrusion lines. Absolutely new is the non-scanning principle, using high resolution X-ray sensitive line sensors to take continuously X-ray pictures of the product. Powerful signal processors calculate the measured values directly from the X-ray picture and provide as well thickness and centricity and diameter information within fractions of a second. This X-RAY 2000 technology provides without the need of any calibration measurements directly at the production process and enables a fast centring, an automatic control, and optimised production.
- Tel: 1-770-486-1233
- Fax: +1-770-486-1201
- Email:Click here
- Contact: Sales Dept

Magnetic Analysis Corporation NY United States
- MAC has been designing and manufacturing NDT equipment and systems for 75 years.MAC systems are installed in plants throughout the world, including Europe, China, Korea, Australia, India, North & South America including Brazil
- Tel: 914-699-9450
- Fax: 914-699-9837
- Email:Click here
- Contact: Dudley Boden

Current Tech CO United States
- BendPro CNC control for multi-axis benders and Control-A-Bend digital control for single axis benders. We have developed control systems for all the major brand machines, including Pines, Conrac, Eaton Leonard, Eagle, Addison and Wallace. We also produce custom controls for end users, OEMs, and machine re-builders...
- Tel: (303) 988-8941
- Fax: (303) 988-2508
- Email:Click here
- Contact: Dennis Ekren

Abante Automation Inc. Canada
- ABANTE Automation Inc. WT-120 Tube Weld Inspection is a high speed 3D laser-vision inspection system capable of inspecting welds on tubes either outside or inside with a minimum inside diameter of 380mm. Typical weld bead to be inspected is 30mm wide. Maximum scanning speed is 0.5m/sec. Besides welding defects such as undercuts, blow holes and porosity, it measures the weld bead height and width. It also to detect other defects such as mismatch. Sensors operate up to 3840 profiles per second each. I is needed to trigger the profile acquisition every 0.13 mm regardless of the inspection speed up to a maximum of 0.5m/sec.
- Tel: 1-514-695-1588
- Fax: 1-514-695-5580
- Email:Click here
- Contact: Mrs. Jagoda Prkut

Airmo, Inc. MN United States
- Tube Endforming - Bell, reductions, flares, and beads. Burst chambers and pressure systems and tooling. Tube Expansion - HVAC tube to fin.
- Tel: 763-786-0000
- Fax: 763-786-4622
- Email:Click here
- Contact: Harry Moran

Richardson Electronics, Ltd IL USA
- Impenders, Power Oscillator Tubes, Power Semiconductors & Capacitors
- Tel: (800) 348-5580, (708) 208-2200
- Fax: (708) 208-2550
- Email:Click here

Magnetic Analysis Corporation NY United States
- MAC - a leader in non-destructive testing has developed the worlds most selective test instruments to precisely differentiate between normal variations and unacceptable defects in your material.
- Tel: (914) 699-9450
- Fax: (914) 699-9837
- Email:Click here
- Contact: Sales dept

Modular Vision Systems Inc. Canada
- Automatic Non-contact welding seam tracking
- Tel: (514) 333-0140
- Fax: (514) 333-8636
- Email:Click here

Electro-Machinery & Electronics TX USA
- Manufacturer of machine accessories, electrical repair parts, idler controls, and auxilary 120/120 DC/AC inverters.
- Tel: 512-664-4413
- Fax: 512-664-4413
- Email:Click here
- Contact: David C. Herbert

Tube Works, Inc. MI United States
- We specialize in used equipment for the tubing industry. we have a large inventory of used benders, end formers and other related equipment.
- Tel: 248-656-8855
- Fax: 248-656-7795
- Email:Click here
- Contact: Jason Vandeven

MAG Tool Inc. Canada
- Cutting, beveling, threading, welding, bending, extruding, flanging, nibbling, shearing, swaging, measuring, soldering, freezing, identifying, hot tap
- Tel: (519)651-1050
- Fax: (519)651-1051
- Email:Click here
- Contact: Mark Mcguire

Jesse Engineering Co. - Machinery Division WA United States
- Hydraulic pipe and tube benders, pipe processing equipment, shipyard systems.
- Tel: 253-922-7433
- Fax: 253-922-2536
- Email:Click here
- Contact: Phil Jesse, Jim Dove

Dynapump Inc. CA USA
- Fax: 818-709-2719
- Email:Click here
- Contact: Mike Christiansen

Gw Systems Canada
- The software calculates the intersection of up to 3 tubes of different cross sections, meeting in or out of plane, with variable offsets and angles.
- Tel: (519) 853-0712
- Fax: (519) 853-5596
- Email:Click here
- Contact: George Weisz

Fairfield Machine Co., Inc. OH USA
- Pipe & tube finishing floor design, control, material handling, end finishing, cutting, threading and testing
- Tel: 330-482-3388
- Fax: 330-482-5052
- Email:Click here
- Contact: James V. Hynes

PIW Machinery, Inc. OH USA
- Hydrostatic testers, pipe and tube handling and finishing equipment (new and refurbished)
- Tel: (330)744-9555
- Fax: (330)744-9577
- Email:Click here
- Contact: Steve Tesanovich

Advanced Kiffer Industries, Inc. OH USA
- Full range of eddycurrent equipment for in-process or off-line inspection
- Tel: 216 267 8181
- Fax: 216 267 8182
- Email:Click here
- Contact: Brian Roberts

Tubular Solutions Inc. OH United States
- Manufacturers' representatives for all catagories of tube and pipe fabricating equiment & tooling
- Tel: 330-723-7662
- Fax: 330-722-2129
- Email:Click here
- Contact: Greg Miller

Ramtech OH USA
- "TuBend" automatically drafts orthogonal and isometric views of tubing. "TuBend" works with Autocad. CNC post processing opptional.
- Tel: 614-771-8846
- Email:Click here
- Contact: Jesse L. Ramey

Coil Joining Technologies OH USA
- Uncoilers, Peelers, Flatteners, Coil End Welders, Strip Accumulators, In-Line Gauge Correction
- Tel: 440-582-5006
- Fax: 440-582-5255
- Email:Click here
- Contact: Bud Graham

Westinghouse Savannah River Company SC USA
- Tctbis is a hardware/software system for automated inspecting the insides of tubes for physical and chemical defects.
- Tel: 803-725-2656
- Fax: 803-725-7369
- Email:Click here
- Contact: Larry Harpring

Absolute Engineering Company OH USA
- Custom drilling, cut-off, measuring/testing, welding. Supplier of TiNi step bits 3/8" to 1-3/8" custom diameter available.
- Tel: 419-535-9715
- Fax: 419-535-9717
- Email:Click here
- Contact: Dan Strzesynski

Electronic Heating Equipment, Inc. WA USA
- impeders from 5mm to over 150mm diameter, ferrite, impeder casing, work coils & impeder testing equipment.
- Tel: 253 862 7914
- Fax: 253 862 0219
- Email:Click here
- Contact: John Wright

Adaptive Motion Control Systems MI United States
- Electric CNC tube benders (horizontal & vertical), endformers, measuring equipment, control systems, and used benders. integrated tube cut-off...
- Tel: 248-926-0190
- Fax: 248-926-0446
- Email:Click here
- Contact: Craig Webster or Patrick Retsel

Advanced Tubular Technologies MI United States
- Advanced tubular technologies is a software manufacturer that specializes in producing software and communicationssolutions for tube fabricators.
- Tel: 248 363-0992
- Fax: 248 363-1689
- Email:Click here
- Contact: Michael Cone

Quest Integrated, Inc. WA USA
- Laser system to inspect interior surfaces of tubing for corrosion, pitting, erosion, deformation, etc. . accuracy is +/- 0.002"
- Tel: 253 872-1275
- Fax: 253 872-8967
- Email:Click here
- Contact: Richard D. Roberts

EZpipe CA USA
- Windows software to print custom patterns for pipe intersections. Any angles and sizes.
- Tel: (760) 762-6301
- Fax: (760) 762-6301
- Email:Click here
- Contact: Dan Meek

Details Diversified OH USA
- New ***pipe & tube measuring table
- Tel: 440-247-5515
- Fax: 440-247-5561
- Email:Click here
- Contact: Lisa Copenhaver

Flex Systems Consultants Inc. OH USA
- "Everything you can think of to do to a tube and more!"
- Tel: 330.939.1011
- Fax: 330.939.1011
- Email:Click here
- Contact: Tony Rakoci

PMC Industries Inc. OH USA
- Full line mfr. of pipe/tube and cplg. end-finishing machines; tooling & parts; instruments and gages; engineering and field service assistance
- Tel: (440) 943-3300
- Fax: (440) 944-1974
- Email:Click here
- Contact: Paul Znidar

Sirius Associates CA USA
- Size 20 and 25 optical encoders all metal disc/ mulitple interface electronic solutions for all applications.
- Tel: (805) 938-1941
- Fax: (805) 938-1951
- Email:Click here
- Contact: R. Gale Weaver

Current Tech Corporation CO USA
- Control-a-bend models are available for new or used Pines, Conrac, Di-Acro, Wallace, and other benders. Horizontal and vertical benders supported!
- Tel: 303 988 8941
- Fax: 303 988 2508
- Email:Click here
- Contact: Dennis Ekren

1D Solutions Chile
- The most simple, efficient and powerful software tool to generate optimum cutting plans, when manufacturers require the cutting of big tubes into smaller pieces, but avoiding the waste of materials. Useful with tubes, extrusions, structural shapes etc.
- Tel: 56-99-8571596
- Fax: 56-99-8571596
- Email:Click here
- Contact: Jaime Jimenez

Springback Grp, LLC TN USA
- New, remanufactured, & used pines mandrel & vertical compression benders from 1/8" to 10" od, bender tooling, cut-offs, end finishers, CMM's
- Tel: 615-230-7171
- Fax: 615-452-3237
- Email:Click here
- Contact: Rick Ott

Sikowski & Associates, Inc. MI USA
- The servopress is more than just a test machine. while it can perform a variety of tests such as ldh, olson cup draw, osu formability and friction an
- Tel: 810-469-3363
- Email:Click here
- Contact: Dennis A. Sikowski

TAC Technical Instrument Corp. NJ USA
- Ultrasonic tube and bar testers including on-line weld testers and off-line full body testers. also ultrasonic tube and bar inspection services.
- Tel: (609) 882-2894
- Fax: (609) 882-3147
- Email:Click here
- Contact: Frederick A. Beck

Inspectech Inc. Canada
- Manufacturer of NDT equipment (UT, Full Body Eddy Current, Flux Leakage and more.....)
- Tel: 416-757-1179
- Fax: 416-757-8096
- Email:Click here
- Contact: Elizabeth Baleck

Beta Lasermike, Inc. OH USA
- Worldwide provider of diameter measurement technology and sensor/process control solutions to wire/cable, extrusion, and metrology markets.
- Tel: 937-233-9935
- Fax: 937-233-7284
- Email:Click here
- Contact: Marsha Osman

Scan Systems Corporation TX United States
- Magnetic Flux Leakage (MFL) Seamless Pipe Inspection Equipment, Supplies, Spares and Repair Services. Portable EDM equipment and services for manufacturing artificial flaws for NDT (NDE) test standards and coupons.
- Tel: (713) 983-9480
- Fax: (713) 983-9490
- Email:Click here
- Contact: David Steely

Fairfield Machine Co., Inc. OH USA
- Handling and finishing equipment for the pipe and tube industries
- Tel: 330-482-3388
- Fax: 330-482-5052
- Email:Click here
- Contact: Dan Denery

Interlaken Technology Corporation MN United States
- Interlaken's Hydroforming Press provides closed loop control of forces, motions and pressures to produce high quality parts. It uses Interlaken's UniPress Control System, which can adapt to most hydraulic press equipment.
- Tel: 952-942-7499
- Fax: 952-942-7599
- Email:Click here
- Contact: Dan Prill

SMS Meer GmbH Germany
- SMS Meer is a worldwide leader in the manufacture of machinery and equipment for seamless tube plants and has many years of experience as well as the relevant technology and know-how for all tube processes.
- Tel: +49-21 61 / 3 50-6 28
- Fax: +49-21 61 / 3 50-8 62
- Email:Click here
- Contact: Peter Byroslawsky

AKS, Inc OH United States
- nondestructive inspection quality control systems
- Tel: +1 216 267 8181
- Fax: +1216 267 8182
- Email:Click here
- Contact: Sales dept

NDT Technologies Inc Canada
- Ultrasonic, Eddy-Current and radiographic inspections
- Tel: +1 (514) 457-7650
- Fax: +1 (514) 457-7652
- Email:Click here
- Contact: Sales dept

Zetec Inc WA United States
- eddy current specialist in the nondestructive testing (NDT) industry
- Tel: +1 425 392 5316
- Fax: +1425 392 2086
- Email:Click here
- Contact: Sales dept

R/D Tech -- Canada
- R/D Tech designs and manufactures eddy current and ultrasound test systems for manual and automated inspections in nondestructive testing (NDT).
- Tel: 418 872-1155
- Fax: 418 872-5431
- Email:Click here
- Contact: Carl Mercier

Tecnar -- Canada
- Laser-Ultrasonic Thickness gauge for on-line wall thickness and eccentricity measurement of hot seamless steel tube.
- Tel: (450) 461-1221
- Fax: (450) 461-0808
- Email:Click here
- Contact: Marc Choque

THE SITE FOR TUBE AND PIPE INDUSTRIES
http://www.tubenet.org

email: info@tubenet.org
Copyright © Juha Haapala. All rights reserved.




















.