TubeNet Logo

THE SITE FOR TUBE AND PIPE INDUSTRIES
http://www.tubenet.org

Swaging machines

Krollmann Germany
- Swaging machines are for chipless machining and forming of tubes

They are in use for producing tag ends and for hot ans cold reduction of tools and tublar finished components.

They are constructed with two or four "rotating" tools (2/R and 4/R), or four "fixed" tools (4/S). The 4/S machines are made for prduction of square and rectangular reductions.
- Tel: +49 (0) 23 52 / 95 59
- Fax: +49 (0) 23 52 / 5 08 22
- Email:Click here
- Contact: Sales Dept

Lillbacka Powerco Oy Finland
- Full range of swaging machines. Portable, Benchtops,Production units.
- Tel: +358 6 485 4444
- Fax: +358 6 485 4400
- Email:Click here
- Contact: Paivi Armstrong

EBM Erich Buechele Maschinenbau Gmbh Germany
- Tube/pipe end former - Ram forming, swaging, i/o machines - manual/automated systems, tooling, air gap tube processing, turn key production equipment
- Tel: +49 (8271) 8168-0
- Fax: +49 (8271) 8168-36
- Email:Click here
- Contact: Erich Buechele

SMS Meer GmbH Germany
- SMS Meer is a worldwide leader in the manufacture of machinery and equipment for seamless tube plants and has many years of experience as well as the relevant technology and know-how for all tube processes.
- Tel: +49-21 61 / 3 50-6 28
- Fax: +49-21 61 / 3 50-8 62
- Email:Click here
- Contact: Peter Byroslawsky

Refi Automazioni Oleodinamiche S.r.l. -- Italy
- Tube swaging machines
- Tel: 02.964.08.459
- Fax: 02.964.08.460
- Email:Click here
- Contact: Sales dept

Techniswage Limited UK
- 'Rotary Swaging' is a hammer forming process for the reducing cross-sections of solids, tubes and wires. The main application is the production of circular, concentric reductions on one / both ends of the work piece or in the centre section. The process may also be used in producing 'regular' forms e.g. Hexagonal, octagonal and square sections.


Advantages of Rotary Swaging

The majority of components are formed in a cold state and as a consequence the following are typical advantages of cold forming;

Short cycle times,
Good surface finishes,
Tight tolerances,
No material loss
Gains in wall thickness
Better grain structures
Minimum 'notch' effect,
Increased strength and hardness.

- Tel: 0121 553 2364
- Fax: 0121 553 2363
- Email:Click here
- Contact: Sales Dept

THE SITE FOR TUBE AND PIPE INDUSTRIES
http://www.tubenet.org

email: info@tubenet.org
Copyright © Juha Haapala. All rights reserved.




















.