TubeNet Logo

THE SITE FOR TUBE AND PIPE INDUSTRIES
http://www.tubenet.org

Automotive tubing

Tubificio di Terni s.r.l. -- Italy
- Electrowelded St. Steel tubes for Automotive Exhaust Systems
- Tel: +39 07448081
- Fax: +39 0744812902
- Email:Click here
- Contact: Sales dept

Siebe Automotive (UK) Limited United Kingdom
- Design and manufacture of EGR systems, HVAC water valves and support sensors. Full Service supply for design and manufacture of Fuel and Brake systems Low cost manufacturer.
- Tel: 01752 751703
- Fax: 01752 751700
- Email:Click here
- Contact: Peter D. Moate

Bant Boru Turkey
- Since 1930's, double wall tubes have been used as breake and oil lines in automotive industry. although, there have been some replacements for oil lines, "double wall tubes" are still the only solituon for brake lines and will be so far many years to come. Its sandwich-like construction provides resistance to vibration and its circumferencial brazing provides the high burting pressure characteristics.

Bant-Boru "Double-Wall Tubes" meet the following specifications :

- TSE 5130
- SAE J 527
- ASTM A 254
- DIN 74234
- FORD WSA M1A308 A2
- RENAULT 31-03-010
- FIAT 9.02145
- DAIMLER CHRYSLER DBL 4040

Bant-boru uses an in-line process to produce double wall tubes. The raw material, specially cold-rolled and copper coated steel strip is fed to the tube mill and from the other and finished tubing is obtained in COIL from of several hundred meters in length. The main stages of this in-line process is to obtain the required physical characteristics and coiling. The result of this unique process is to obtain clean, leak proof, sturdy and reliable tubes with following characteristics :

- Extremelly clean inside surface
- High resistance to vibration
- High bursting pressure resistance
- Easiness in bending and forming
- Uniform wall thickness.


- Tel: (0216) 311 20 50, 311 20
- Fax: (0216) 311 83 86
- Email:Click here
- Contact: Sales Dept

KLT Automotive and Tubular Products Ltd India
- Tube systems for automotive - Worldwide
- Chassis tube
- Automotive axle tubes
- Shock absorber tubes
- Propeller shaft tubes
- Tubes for hydroforming
- Tubes for steering columns
- Tubes for boilers & Heat exchangers

- Tel: +91-22-5570 4411
- Fax: +91-22-2899 1854
- Email:Click here
- Contact: Sales Dept

AN Motorsport Ltd UK
- Design & Manufacture of fluid systems for the Motorsport Industry.Flexible hoses and rigid pipework in Titanium, Steel and Aluminium.
- Tel: 01628-776320
- Fax: 01628 782039
- Email:Click here
- Contact: Andy Dean

Sofratest -- France
- Eddy Current and Ultrasonic NDT testing systems
- Tel: +33 ( 0 ) 1 34 75 50 00
- Fax: +33 ( 0 ) 1 34 75 53 41
- Email:Click here
- Contact: Sales Dept

MHP Mannesmann Prazisrohr GmbH Germany
- Engine/gear box:
- Camshafts
- Rocker arm shafts
- Turned/ machined parts
- Gear shafts

Fuel injection
- Diesel injection lines
- Pressure lines
- Pump bodies

Drive transmission
- Drive shafts (monobloc)
- Drive shafts (3-parts)
- Cardan shafts
- Ball cages
- Profiles

Chassis
- Shock absorber cylinders
- Shock absorber containers
- Piston rods
- Stabilisers
- Differential shafts

Steering system
- Power steering cylinders
- Mechanical steering system
- Steering shafts

Passenger protection
- Airbags
- Impact dampers

Body
- Cross members
- Hydroformed parts
- Gas springs
- Tel: +49 2381-420-0
- Fax: +49 2381-420-265
- Email:Click here
- Contact: Sales dept

THE SITE FOR TUBE AND PIPE INDUSTRIES
http://www.tubenet.org

email: info@tubenet.org
Copyright © Juha Haapala. All rights reserved.




















.